National Instruments 371889A-01 Manual

A SERVICE OF

next previous

Buses

Multicap 9 User Guide 6-33

7. In the

Bus box, select the bus you wish to connect to from the Name drop-down list.

8. In the

Nets in Bus field select:

• existing nets — for example, “1” and/or “2” in the above, and click the down-arrow

button to move them to the bottom-right field.

• <new> — to map new nets to the selected component pins. Each time you click the

down-arrow button when <new> is highlighted, an instance of <new> appears in the

bottom-right field.

Note You can also click

Auto-assign to automatically assign new nets to the mapped pins.