MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-424Labeling
4
Console Procedure More→ → → →
Dial ext. no.→ →Drop→Enter label→ →
→ →
PC Procedure → → → →Type ext. no.→ →
+
→
Type label→ → → →
Lines or Trunks 4
Use this procedure to establish alphanumeric system labels for display telephone
users to identify the line or trunk being used.
Summary: Lines or Trunks 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option No
Console Procedure More
→ → →Dial line/trunk no.→
→Drop→Dial label→ → →
PC Procedure → → →Type line/trunk no.→ →
+
→
Type label→ → →
Posted Message 4
Use this procedure to add or change existing posted messages. The posted
messages allow callers with display telephones to know why the called extension
does not answer.
Each posted message can have a maximum of 16 characters. Messages 2
through 20 can be changed through programming. Message 1, Do Not Disturb,
cannot be changed.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, posted messages are not supported
across networked systems.
