MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 4-322System Features
4
Console Procedure → →Drop→Dial no. of seconds→
→
PC Procedure → →
+
→Type no. of seconds→ →
Call Park Return Time 4
Use this procedure to specify the number of seconds before a call put on hold with
the Park feature is returned to the originator.
Summary: Call Park Return Time 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting 180 seconds
Valid Entries 30 to 300 seconds, in 10-second increments
Inspect No
Copy Option No
Console Procedure
→ →Drop→Dial no. of seconds→
→
PC Procedure → →
+
→Type no. of seconds→ →
Delay Ring Interval 4
Use this procedure to specify the number of rings for the delay ring interval. The
delay ring interval is applied when a primary, secondary, or group cover button is
set to delayed ring.
NOTE:NOTE:NOTE:
This setting is for Release 4.0 and earlier systems. Use Primary Cover Ring
Delay and Secondary Cover Ring Delay for Release 4.1 and later systems.
Summary: Delay Ring Interval 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7c, Group Coverage
