A SERVICE OF

logo

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Programming Procedures
Page 4-110DS1 Facilities
4
Frame Format 4
Use this procedure to specify the framing format for the 100D module as
D4-compatible or Extended Superframe. Your selection must match the framing
mode at the far end of the DS1 facility.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems, use the Extended Superframe format for
tandem PRI trunks.
Summary: Frame Format 4
Programmable by System Manager
Mode All
Idle Condition 100D module idle
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting D4 compatible
Valid Entries D4, ESF
Inspect No
Copy Option No
Console Procedure
Dial slot no.
Select format type
PC Procedure Type slot no. Select format
type
Procedure: Frame Format 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.