MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111
Issue 1
February 1998
Common Administrative Procedures
Page 3-22System Renumbering
3
Console Procedure → →Dial no. of first extension in
range
→ →Dial no. of last extension in range→
→Dial no. of pattern for extension range→
→ →
PC Procedure → →Type no. of first extension in range→ →Type
no. of last extension in range
→ →Type no. of pattern for
extension range
→ → →
Procedure: Specifying New Extension Ranges 3
Console Display/Instructions Additional Information PC
Select the System Renumber menu.
Select Non-Local UDP renumbering.
Dial or type the first number in the range.
Save your entry.
Select
.
If the number conflicts with an existing
number on the local system or is not the
beginning number of an existing range and
is within a range for a remote system,
check the system planning forms and try
again.
SP: “Entering an Extension”
