![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/67/86797c73-bebd-4b91-8a44-47a7f16c51d9/86797c73-bebd-4b91-8a44-47a7f16c51d9-bg78.png)
Using the EPSON Status Monitor 2 Utility
The EPSON Status Monitor 2 utility for Windows 95 allows you
to monitor your printer’s status, alerts you when printer errors
occur, and provides troubleshooting instructions when needed.
Note:
To monitor your printer through a network, you must install an
optional Type B Ethernet Interface Card (C82357 ) in your printer
and use the Status Monitor utility that comes with this interface card.
See the manual that comes with the interface card for instructions on
using the Status Monitor in a network environment.
Before using the Status Monitor, be sure to read the README
file located in the EPSON folder on your hard drive. This file
contains the latest information on the Status Monitor.
Opening EPSON Status Monitor 2
After you install EPSON Status Monitor 2 and restart your
computer, you will find a printer-shaped background
monitoring icon on the taskbar at the bottom of your computer
screen.
To open the EPSON Status Monitor 2 window shown on the
next page, double-click the background monitoring icon. You
can also open this window from
Start.
Click
Start
, point to
Programs
, and
Epson
, then click the
EPSON Status Monitor
icon.
Checking the Printer Status
This section describes how to use the Status Monitor to get
general and detailed printer status information and
summarizes the EPSON Status Monitor 2’s main features.
L
Keywest Rev.c
A5 size Chapter 5
10/09/97 pass 0
5-10
Using EPSON Printer Utilities