5
SelecType
5-27
SymSet
Selects the default symbol set. If the font you selected in
FontSource
and
Font Number
is not available in the new SymSet
setting, the Fontsource and the Font Number values are
automatically replaced with the default value.
Form
Selects the number of lines for the selected paper size and
orientation. This causes a line spacing (VMI) change also, and the
new VMI value is stored in the printer. This means that later
changes in the Page Size or the Orientation settings cause changes
in the Form value, based on the stored VMI.
Source SymSet
Available only when an optional font ROM is installed.
Dest SymSet
Available only when an optional font ROM is installed.
CR Function
When CR is set for the CR Function, the printer does not perform
a line feed (LF) command with each carriage return (CR). Setting
CR+LF for the CR Function causes the printer to add a line feed
to each carriage return it receives. Select CR+LF for this function
if you find lines of text are overlapping in your document.
