5
SelecType
5-33
AutoCR
Use the automatic carriage return option to perform a carriage-
return line-feed (CR-LF) operation whenever the print position
exceeds the right margin. if Auto CR is
Off
, the printer does not
print characters beyond the right margin, and it does. not perform
a linewrap until it receives a CR. Most software programs take
care of this function.
AutoLF
When you set AutoLF to
Off
, the printer does not send an
automatic line feed (LF) command with each carriage return (CR).
When you set AutoLF to
On
, the printer adds a line feed to each
carriage return it receives. If your text lines overprint each other,
set AutoLF to
On
.
Bit Image
With BitImage set to
Dark
or
Light
, your printer can correctly
emulate the graphics densities set with the printer commands.
When you select
Dark
, the bit image density is high. When you
select
Light
, the bit image density is low.
The BarCode setting converts bit images to bar codes by
automatically filling in any vertical gaps between dots. This
produces unbroken vertical lines that can be read by a bar code
reader. BarCode is not available in I239X mode.
This mode reduces the size of the image being printed and may
cause some distortion when printing bit-image graphics.
ZeroChar
This option determines whether the printer prints a slashed zero
( ) or an unslashed zero (0). This feature is useful for clearly
distinguishing between an uppercase letter O and zero when
printing documents such as program lists.
