5-10
SelecType
*Available only when the optional interface is installed.
Printing Menu
These settings are made in everyday use. Most can be set using
your software. Always check the software settings, because the
software settings override the Printing Menu settings. Also see
page 5-14.
Paper Source, Page Size, Wide A4, Orientation, Copies,
Manual Feed, Resolution, Skip Blank Page
Tray Menu
These settings display the paper size and type of paper you load.
Accessing this menu also lets you check the size of the paper
currently loaded. Also see page 5-16.
MP Mode, MP Tray Size, LC1 Size*, LC2 Size**, LC3 Size**, MP
Type, LC1 Type**, LC2 Type**, LC3 Type**
* LC1 size, LC2 size, and LC3 size display the currently loaded paper
size.
** Availabe only when the optional Lower Paper Cassette is installed.
Config Menu
These settings affect the printer’s performance. Also see page 5-18.
RITech, Toner Save, Top Offset, LeftOffset, Size Ignore, Auto
Cont, Page Protect, Image Optimum, Paper Type
Setup Menu
These settings provide the printer with information necessary for
printing. Also see page 5-20.
Interface, Time Out, Standby, Toner, Toner Count Clear,
Total Pages, SelecType Init
