A SERVICE OF

logo

6-20
Troubleshooting and Maintenance
The printer's current interface has been reset and the buffer is
cleared. However, other interfaces are still active and retain their
settings and data.
All printer settings have been reset to the user default
configuration, the last settings that were saved.
You have changed the SelecType setting but the new setting is not
activated immediately after exiting SelecType. To activate the
new setting, do one of the following: (1) exit SelecType by pressing
Continue
or
On Line
(the new setting is activated after the
current print job is finished), or (2) reset the printer by pressing
ALT and Reset
at the same time.
The printer is checking the ROM.
The printer is performing its internal check cycle. It finishes soon.
Reset
Reset All
Reset to Save
ROM Check
Self Test