6
Troubleshooting and Maintenance
6-17
Manual Feed mode is specified for the current print job. Make
sure the paper size indicated by XXX is loaded in the MP Tray,
then press
On Line
.
If you do not want to print this job in manual mode, press
Continue
. The print feeds paper according to the Paper Source
setting.
For detailed information on the Manual Feed mode, see Chapter 1.
The printer has insufficient memory available for the current task.
To correct the error, press the
Continue
button on the control
panel. If the message remains, reset the printer as described on page
6-22. You can also clear this message by turning the printer off,
waiting 10 seconds, and then turning it back on.
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
Lower the Print Quality setting to 300 dpi.
You can also add more memory to the printer as described in
Chapter 3.
The printer has insufficient memory available for the current task.
Add more memory to your printer.
The printer is not ready to print.
Manual Feed XXX
Mem Overflow
Need Memory
Offline
