C
Command Summary
C-15
PJL Commands
This section lists the available commands for printer job language mode
(PJL). For more information on PJL, refer to the Printer Job Language
Technical Reference Manual from Hewlett-Packard.
COMMENT @PJL COMMENT [words] [<CR>] <LF>
DEFAULT @PJL DEFAULT [LPARM: ***] variable = value [<CR>]
<LF>
DINQUIRE @PJL DINQUIRE [LPARM: ***] variable [<CR>] <LF>
ECHO @PJL ECHO [Words] [<CR>] <LF>
ENTER @PJL ENTER LANGUAGE = *** [<CR>] <LF>
EOJ @PJL EOJ [NAME= ***] [<CR>] <LF>
INFO @PJL INFO read only variable [<CR>] <LF>
INITIALIZE @PJL INITIALIZE [<CR>] <LF>
INQUIRE @PJL INQUIRE [LPARM: ***] variable [<CR>] <LF>
JOB @PJL JOB [NAME = ***][START = ***][END = ***][<CR>]
<LF>
OPMSG @PJL OPMSG DISPLAY = *** [<CR>] <LF>
RDYMSG @PJL RDYMSG DISPLAY = *** [<CR>] <LF>
RESET @PJL RESET [<CR>] <LF>
SET @PJL SET [LPARM: ***] variable = value [<CR>] <LF>
STMSG @PJL STMSG DISPLAY = *** [<CR>] <LF>
UEL <ESC>%-12345X
USTATUS @PJL USTATUS variable = value [<CR>] <LF>
USTATUSOFF @PJL USTATUSOFF [<CR>] <LF>
PJL @PJL [<CR>] <LF>
