A SERVICE OF

logo

3
Options
3-7
6. Lift up the printer. Make sure the printer and cassette units
are facing in the same direction. Aligning the pin on the
cassette unit with the hole on the bottom of the printer, lower
the printer until it rests securely on the cassette unit.
7. Secure the printer to the cassette unit with the screws that
come with the cassette unit. Install three of the screws at the
location noted below.
8. Reconnect any interface cable you removed.
9. Make sure the printer’s power switch is turned off, then plug
the power cord into the printer and into an electrical outlet.
Three areas for tightening