A SERVICE OF

logo

3
Options
3-21
To add a direct connection to a Macintosh computer with the
optional Adobe PostScript 3 Package, use the AppleTalk Interface
Card (C82357
, C82362
).
Note:
If you reset the printer while it is receiving data through the AppleTalk
Interface Card, you need to turn the printer off and then on again before
it can communicate properly.
To add a direct connection to your GPIB network, use the GPIB
Interface Card (C82313
).
Installing an Interface Card
Follow the steps below to install an optional interface card.
1. Turn off the printer.
2. Unplug the power cable from the electrical outlet.
3. Turn the printer so its back faces you.
4. Remove the two screws that secure the Type-B slot cover and
remove the cover.