2-49
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
OL-29284-01, Release 6.x
Chapter 2 Configuring Interfaces
Verifying Interfaces Configuration
channel-group 11 force
no shutdown
Example 2-12 displays the running configuration information for a specified interface. The interface
configuration commands are grouped together.
Example 2-12 Displays the Running Configuration for a Specified Interface
switch# show running-config interface fc1/1
interface fc9/1
switchport speed 2000
switchport mode E
channel-group 11 force
no shutdown
Example 2-13 displays the running configuration after the system default switchport mode F command
is executed.
Example 2-13 Displays the Running Configuration After the System Default Switchport Mode F
Command is Executed
switch# show running-config
version 3.1(3)
system default switchport mode F
interface fc4/1
interface fc4/2
interface fc4/3
interface fc4/4
interface fc4/5
interface fc4/6
interface fc4/7
interface fc4/8
interface fc4/9
interface fc4/10
Example 2-14 displays the running configuration after two interfaces are individually configured for
mode FL.
Example 2-14 Displays the Running Configuration After Two Interfaces Are Individually Configured for
Mode FL
switch# show running-config
version 3.1(3)
system default switchport mode F
interface fc4/1
switchport mode FL
interface fc4/2
interface fc4/3
switchport mode FL
interface fc4/4
interface fc4/5
interface fc4/6
interface fc4/7
interface fc4/8
interface fc4/9
interface fc4/1
Example 2-15 displays interface information in a brief format after the system default switchport mode
F command is executed. Example 2-16 displays interface information in a brief format after two
interfaces are individually configured for mode FL.
