A SERVICE OF

logo

Open as PDF
next previous
2-7
Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide
OL-29284-01, Release 6.x
Chapter 2 Configuring Interfaces
Information About Interfaces
Note Only some of the reason codes are listed in Table 2-4.
If the administrative state is up and the operational state is down, the reason code differs based on the
nonoperational reason code as described in
Table 2-4.
Ta b l e 2-3 Reason Codes for Interface States
Administrative
Configuration
Operational
Status
Reason Code
Up Up None.
Down Down Administratively down—If you administratively configure an interface
as down, you disable the interface. No traffic is received or transmitted.
Up Down See Table 2-4.