90 CHAPTER 5: PLANNING THE 3COM MOBILITY SYSTEM
To clean up a drawing
1 Display the floor plan in the Content panel.
2 In the Task List panel, under RF Planning, click Clean Layout. The Floor
Plan Clean Up wizard appears.
3 In the Remove Lines and Remove Objects group boxes, click next to any
items you do not want 3WXM to remove from the drawing during
cleanup. 3WXM removes all these items by default.
4 To change the short line length, type the new length in the Short Line
Length box. 3WXM removes all lines that are this length or shorter.
5 To change the parallel shape separation distance, type the new length in
the Parallel Shape Separation box.
3WXM removes parallel shapes that are this distance or shorter from the
shape they parallel. For example, if a wall is drawn as parallel lines,
3WXM can remove one of the lines to make the wall a single line.
