A SERVICE OF

logo

Open as PDF
next previous
Computing MAP Placement 143
You must now compute the optimal power. See “Computing Optimal
Power” on page 147.
Locking and Unlocking MAPs
After you compute and place the necessary MAPs for a coverage area,
you can move them to fine-tune the wireless coverage. If you need a
MAP to be located at a fixed location on the floor, you can lock its current
location when you recompute the necessary coverage. A dual-radio MAP
model that is part of two coverage areas and is not locked can be placed
in the shared coverage area.
To lock a MAP
1 Select the MAP you want to lock.
2 Right-click, and select Lock. You can no longer move the MAP.