A SERVICE OF

logo

Open as PDF
next previous
444 CHAPTER 16: MONITORING THE NETWORK
Displaying the
SSID-to-BSSID
Mapping
To display the SSIDs configured on a radio and their BSSIDs, in the RF
Monitor window, select the SSID-BSSID Mapping tab at the bottom of
the window.
BSSID BSSID detected by the radio.
Note — This column displays a single entry for each 3Com
radio, even if the radio is supporting multiple BSSIDs.
However, BSSIDs for third-party 802.11 radios are listed
separately, even if a radio is supporting more than one
BSSID.
Channel Channel on which the BSSID is detected.
RSSI Received signal strength indication (RSSI), in decibels
referred to 1 milliwatt (dBm). A higher value indicates a
stronger signal.
Table 54 RF Monitor RF Neighborhood Columns (continued)
Column Description