Filter
Top Products
Tools Needed:
26
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Cable Drum
No space between Ratchet
Pawl and Cable Drum
indicates engagem
ent
Cable Drum
Ratch
et Pawl
ENGAGED SID
E VIEW
No space between
Ratchet Pawl and
Cable Drum
ENGAGED UNDERNEATH VIEW
Space
between Ratchet Pawl
and Cable Drum
non-indicates engagement
Cable Drum
Ratchet Pawl
DISENGAGED SIDE VIEW
No space between
Ratchet Pawl and
DISENGAGED U
NDERNEATH VIEW
UPPER POSITION
LOWER POSITION
LOWER POSITION SIDE VIEW
UPPER POSITION SIDE VIEW
Ratchet Pawl in Lower Position
Ratchet Pawl in Upper Position
Use these Illustr
ation, in conjunction with the Instructions on the other side of
this label.
WARNING
Rachet Bracket
is under
EXTREME
SPRING
TENSION
.
To avoid po
ssible seve
re or
fatal injury
,
DO
NOT
remove
fasteners from ratchet
bracket
until spring(s
) are fully
wnwou
nd.
To safely unwind spring(s)
read
and fol
low the directions i
n the
installation ins
tructions/owne
rs
manual
.
DO NOT REMOVE T
HIS TAG.
IMPORTANT: WARNING TAGS MUST BE
SECURELY ATTACHED TO BOTH END
BRACKETS.
End brackets are right and left hand.
You can identify the right hand end
bracket by the disconnect cable guide
hole in the top of the bracket.
Attach TorqueMaster
®
warning tags to
both end brackets prior to installing.
Beginning with either side, slide the
end bracket onto the winding shaft so
that the grooves in the ratchet wheel fit
onto the winding shaft splines.
Secure end bracket to the jamb using
(1) 5/16” x 1-5/8” hex head lag screw
and (1) 5/16”-18 x 3/4” carriage bolt
and hex nut.
Repeat for other end bracket.
SPLINES
WINDING
SHAFT
GROOVE
DISCONNECT
CABLE GUIDE
HOLE
RIGHT END
BRACKET
WARNING TAG
22
End Brackets
Power Drill
7/16” Socket
Driver
5/16” Wrench
Cable Drum
No space between Ratchet
Pawl and Cable Drum
indicates engagement
Cable Drum
Ratchet Pawl
ENGAGED SIDE VIEW
No space between
Ratchet Pawl and
Cable Drum
ENGAGED UNDERNEATH VIEW
Space between Ratchet Pawl
and Cable Drum
non-indicates engagement
Cable Drum
Ratchet Pawl
DISENGAGED SIDE VIEW
No space between
Ratchet Pawl and
DISENGAGED U
NDERNEATH VIEW
UPPER POSITION
LOWER POSITION
LOWER POSITION SIDE VIEW
UPPER
POSITION SIDE VIEW
Rat
chet Pawl in Lower Position
Ratchet Pawl in Upper Position
Use these Illustration, in conjunction with the Instructions on the other side of
this label.
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwound.
To safely unwind spring(s)
read
and follow the directions in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
RIGHT END
BRACKET
RATCHET
WHEEL
TEETH POINTING
UPWARD
Cab
le Drum
No s
pace betwe
en Ratchet
Pawl and C
able Dr
um
indicates engagem
ent
Cable Drum
Ratchet Paw
l
ENG
AGED
SIDE VIEW
No s
pace
between
Rat
chet Pawl
and
Cable Drum
ENGAGED UNDERNEA
TH VIEW
Space b
etween Ratche
t Pawl
and Cab
le D
rum
non-indicates engagem
ent
Cab
le Drum
Ratchet Paw
l
DISENGA
GED
SIDE VIEW
No s
pace between
Ratchet
Pawl and
DISENGA
GED U
NDERNEAT
H VIEW
UPPER
POSI
TION
LOW
ER POSITION
LOW
ER POSITION
SIDE VIEW
UPPER POSI
TION
SIDE VIEW
Ratchet Paw
l in Lower
Position
Ratchet Pawl
in U
pper Po
sition
Use t
hese I
llus
tration, i
n conjunction with the Instructions on the other side of
this label.
WARNING
Rachet Bracket is under
EXTREME SPRING
TENSION
.
To avoid possible severe or
fatal injury,
DO NOT
remove
fasteners from ratchet bracket
until spring(s) are fully
wnwo
und.
To
safely unwind spring(s)
read
and follow the directions in the
installation instructions/owners
manual.
DO NOT REMOVE THIS TAG.
5/16” X 1-5/8”
HEX HEAD LAG
5/16”-18 x 3/4”
CARRIAGE BOLT
AND HEX NUT
RIGHT END
BRACKET