Filter
Top Products
Tools Needed:
Tools Needed:
8
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Position the horizontal angle as shown.
Place tabs of horizontal angle in the key slot
of horizontal track. Using a hammer, tap the
horizontal angle towards the curved end of
the track until the hole in track and angle
are aligned. Set tracks aside.
NOTE: For larger doors, a full length horizontal
angle may be spot welded to the horizontal
track. If the horizontal angle is not welded,
the full length horizontal angle will be installed
as shown.
Horizontal Angles
Hammer
HORIZONTAL
TRACK
HORIZONTAL
ANGLE
HORIZONTAL ANGLE
HORIZONTAL TRACK
HOLE
HOLE
TABS
KEY SLOT
2
HORIZONTAL
TRACK
TABS
HORIZONTAL
TRACK
HORIZONTAL
ANGLE
Using the jamb bracket schedule, determine
the placement of the jamb brackets for your
door height and track type. To install the jamb
brackets, align the twistlock tab on the quick
install jamb bracket with the quick install
feature in the track and turn the bracket
perpendicular to the track so the mounting
flange is toward the back (flat) leg of the
track.
Installing Jamb Brackets
None
3
TOP
HOLE
MIDDLE
HOLE
BOTTOM
HOLE
QUICK INSTALL FEATURE
LEFT SIDE SHOWN
1ST SET HOLES
2ND SET HOLES
3RD SET HOLES
RIGHT SIDE SHOWN
JAMB BRACKET SCHEDULE
DOOR
HEIGHT
TRACK
HEIGHT
1ST SET 2ND SET 3RD SET
JAMB BKT POSITION JAMB BKT POSITION JAMB BKT POSITION
6’6” 70”(1778mm) QIJB - 3 MIDDLE QIJB - 5 BOTTOM N/A N/A
6’10” 74”(1880mm) QIJB - 3 MIDDLE QIJB - 5 BOTTOM N/A N/A
7’0” 76”(1930mm) QIJB - 3 MIDDLE QIJB - 5 BOTTOM N/A N/A
7’3” 79”(2007mm) QIJB - 3 BOTTOM QIJB - 5 BOTTOM QIJB - 6 BOTTOM
7’6” 82”(2083mm) QIJB - 3 BOTTOM QIJB - 5 BOTTOM QIJB - 6 BOTTOM
7’9” 85”(2159mm) QIJB - 3 BOTTOM QIJB - 5 BOTTOM QIJB - 6 BOTTOM
8’0” 88”(2235mm) QIJB - 3 MIDDLE QIJB - 6 TOP QIJB - 7 MIDDLE
TWISTLOCK TAB