Filter
Top Products
Tools Needed:
17
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
16
Shake the TorqueMaster
®
Plus spring tube
assembly gently to extend the winding
shafts out about 5" on each side. For single
spring applications, there will be no left
hand spring in the TorqueMaster
®
Plus
spring tube assembly.
Lift the TorqueMaster
®
Plus spring tube
assembly and rest it on the top of the
flagangles.
NOTE: Cable drum assemblies are marked
right and left hand. Cable drums and
TorqueMaster
®
Plus spring tube assembly
are cam shaped to fit together only one
way.
Starting on the right hand side, slide the
drum wrap over to secure the
counterbalance cables. Pre-wrap the
Torquemaster
®
Plus cable drum with the
counter balance cable 1-1/2 wraps as
shown.
To install the cable drum, slide cable drum
over the winding shaft until the cable drum
seats against the TorqueMaster
®
Plus spring
tube assembly.
The winding shaft must extend past the
cable drum far enough to expose the splines
and the groove. Align the winding shaft
groove with the round notch in the
flagangle.
For double spring applications, repeat for
opposite side.
For single spring applications, pre-wrap
the left hand cable drum with
counterbalance cable 1-1/2 wraps and
insert the loose winding shaft into the cable
drum prior to sliding the cable drum over
the TorqueMaster
®
spring tube assembly.
NOTE: On single spring applications, take
care in handling the loose winding shaft
(left side) so that it does not slide back into
the TorqueMaster
®
Plus spring tube
assembly.
Cable Drums/ Drum Wraps
Tape Measure
Step Ladder
WINDING SHAFT
CABLE
DRUM
GROOVE
ROUND NOTCH
FLAGANGLE
SPLINES
COUNTERBALANCE CABLE
CABLE DRUM
WINDING SHAFT
SPLINES
GROOVE
LOOSE WINDING SHAFT
RIGHT DRUM
TORQUEMASTER
®
SPRING TUBE ASSEMBLY
1-1/2 Wraps
COUNTERBALANCE CABLE
DRUMS COME WITH DRUM WRAPS
PRE-INSTALLED ON THEM.
CABLE DRUM
DRUM WRAP
5”