Filter
Top Products
Tools Needed:
Tools Needed:
11
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Stacking Sections - Continued
INTERMEDIATE HINGES
(3) 1/4” - 14 x 5/8”
SELF-TAPPING SCREWS
NOTE: For door section identification see
page 4.
NOTE: 18’-0” wide by 8’-0” high doors
will be supplied with one u-bar for the lock
section.
Center the u-bar on top edge of lock section
and flush with edge of section. Fasten each
end of the u-bar to the endcap with
1/4” - 14 x 7/8” self tapping screws at
30” - 36” inches (762 mm - 914 mm)
intervals across the section.
U-Bar
Power Drill
7/16” Socket
Driver
Tape Measure
8
30” - 36”
1/4” - 14 x 7/8”
SELF TAPPING SCREWS
ATTACHING ENDS AND CENTER OF U-BAR
LOCK SECTION
U-BAR
U-BAR
EDGE
LOCK SECTION