Filter
Top Products
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.
To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com
19
Tools Needed:
INSTALLATION
Attaching Horizontal Track to
Quick Install Flagangle
NOTE: If you have fully adjustable
flagangle, skip this step and complete
Step 12.
To install horizontal track, align key slot
of the horizontal track with the quick
install tab of the flagangle. Push curved
portion of horizontal track down to lock
in place.
Level horizontal track and bolt the top
curve of the low headroom horizontal
track slot in the flagangle using (1)
5/16” washer, (1) 1/4”- 20 x 9/16”
track bolt and (1) 1/4”- 20 flange hex
nut. Repeat for other side.
NOTE: If an idrive
®
opener will be
installed, position horizontal tracks
slightly above level.
NOTE: After completing this step,
continue with Step 13.
KEY SLOT
QUICK
INSTALL
TAB
HORIZONTAL
TRACK
VERTICAL
TRACK
FLAGANGLE
11
7/16” Socket
Ratchet Wrench
7/16” Wrench
Level
KEY SLOT
QUICK
INSTALL
TAB
HORIZONTAL
TRACK
VERTICAL
TRACK
FLAGANGLE
(1) 1/4”- 20 X 9/16”
TRACK BOLT
(1) 1/4”- 20
FLANGE HEX
NUT
TOP CURVE OF
LOW HEADROOM
HORIZONTAL TRACK
(1) 5/16” WASHER
FLAGANGLE