Wagner SprayTech Zzb012eng Septic System User Manual


  Open as PDF
of 68
 
28
ZIP52 FINISHING - PF .
OPERATING MANUAL
EDITION 01 /2010 PART NO. ZZB012ENG
If the system has been used with two component material:
7!2.).'
(ARDENEDMATERIALINTHESPRAYINGSYSTEMWHENCOMPONENT
MATERIALISWORKED
$ESTRUCTIONOFTHEPUMPANDINJECTIONSYSTEM
&OLLOWTHEMANUFACTURER@SWORKINGINSTRUCTIONSPARTICULARLYRE
GARDINGTHEPOTLIFE
2INSETHOROUGHLYBEFORETHEENDOFTHEPOTLIFE
4HEPOTLIFETIMEDECREASESATRAISINGTEMPERATURE
3)()??'"
5.3.3 WORKING BREAKS
Each time you stop spraying, close the motor input air valve (H) and open the re-cycle valve
to release the pressure.
When using catalized paints, the interruption must be considerably shorter than the mix-
ture lifetime.
In case it is not so,wash the system thoroughly.
SIHC_0001_GB
WARNING
Overpressure!
Risk of injury from bursting components.

Frequently check for blocked recirculation pipe - the pipeline
must be completely free.
5.3.2 PAINTING HINTS
If the pump speeds up suddenly and starts to shake, it means that there is no paint left
inside it and that it is sucking air; you must therefore supply it with new paint. If the pump
starts shaking like it would do if there were no paint left (but in fact there is), you must
clean the suction pipe fi lter (see the “Filter cleaning operations”paragraph 6.3
 previous next