Filter
Top Products
39
B_04241
1
4
3
B_04244
2
OPERATING MANUAL
VERSION 10/2013
ORDER NUMBER DOC 2303675
Discharging oil
Procedure:
1 Decommission and clean the device -> follow Chapter 7.3 up to and including point 6.
2 Position device as shown in the picture and dismount the hood and casing.
3 Unscrew piston cover (1).
4 Place empty oil collector (2) under the oil tank.
5 Unscrew oil tank (3) and drain contents.
6 Unscrew and remove locking screws (4) and seals.
7 Slowly start up the pump until no oil ows out of the oil suction tting.
8 Screw in clean oil tank (3) and seal.
9.3.2 CHANGING THE OIL
The oil should be changed after 500 service hours or once a year.
Necessary accessories:
Order No. 322911 Oil lling set
Using hydraulic oil
Using the wrong hydraulic oil can cause a malfunction.
Use only original hydraulic oil - Wagner Order No. 322912 (250 ml or 15 cu inch).
NOTICE