Filter
Top Products
25
B_04239
1
6
7
2
4
5
OPERATING MANUAL
VERSION 10/2013
ORDER NUMBER DOC 2303675
6 ASSEMBLY AND COMMISSIONING
6.1 INSTALLATION AND CONNECTION
6.1.1 INSTALLING THE PUMP
Procedure:
1 Mount the pump on a base frame, trolley
(6), or wall mount.
2 For AirCoat systems: Mount the additional
lter pressure regulator (7) (optional).
3 Mount suction system (5).
4 Mount return hose (4) (optional).
5 Connect high-pressure hose and spray gun
(2) as described in the operating manual.
Note:
This pump can be used as part of a spraying system for Airless or AirCoat applications.
The components can be found in the accessories list, provided that the system was not
obtained as a spray pack.
The nozzles must be selected according to the gun instructions.
Inclined ground!
Risk of accidents if the device rolls away/falls.
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
WARNING