Filter
Top Products
15
OPERATING MANUAL
VERSION 10/2013
ORDER NUMBER DOC 2303675
4.3 USE IN AREAS SUBJECT TO EXPLOSION HAZARDS
The pneumatic pump may be used in potentially explosive areas. The following safety
regulations must be observed and followed.
4.3.1 SAFETY REGULATIONS
Safe handling of WAGNER spray devices
Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:
Do not knock or push the device against steel or rusty iron.
Do not drop the device.
Only use tools that are made of a permitted material.
Ignition temperature of the pumped product
Check that the ignition temperature of the pumped product is higher than the max.
allowable surface temperature.
Medium supporting atomizing
To atomize the product, use only weakly oxidizing gases, e.g. air.
Surface spraying, electrostatics
Do not spray device parts using electrostatic equipment.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
Only use a damp cloth to clean the device.