Filter
Top Products
23
B_01205
"?
B_01207
OPERATING MANUAL
VERSION 10/2013
ORDER NUMBER DOC 2303675
Positioning
The Cobra pump may only be operated in a horizontal
or vertical position as shown in the diagrams. Overhead
operation is not permitted.
Vertical positioning Horizontal positioning
Overhead positioning
Overpressure!
Risk of injury from bursting components.
Never change the safety valve setting.
WARNING
Overhead operation or storage (air motor with pressure regulator below)
Air could get into the hydraulic circuit, causing a malfunction.
Avoid overhead operation or storage at all costs.
Vent, see service manual.
NOTICE
Fluid section (9)
The uid section has been designed as a double diaphragm pump with exchangeable
inlet and outlet valves. Change between "spraying mode" and "circulation mode" using
the relief valve (7).