Filter
Top Products
33
OPERATING MANUAL
VERSION 10/2013
ORDER NUMBER DOC 2303675
7.1 SPRAYING
1 Close gun.
2 Close ball valve.
3 Release the system by opening the gun.
4 Close and secure gun.
If the system has been used with 2K products:
1 Secure gun and place nozzle in the gun.
2 Slowly open the ball valve.
3 Set the required working pressure on the pressure
regulator.
4 Optimize the spraying results as laid down in the gun instructions.
5 Start work process.
Note: Depending on the function, the pump may continue running for 1 - 6 DH/min. after the spray gun is closed.
7.2 WORK INTERRUPTION
Hardened working material in the spraying system when 2K product is processed!
Destruction of pump and injection system.
Follow the manufacturer‘s processing rules, particularly regarding the pot life.
Flush thoroughly before the end of the pot life.
NOTICE
7 OPERATION
B_04301
2
3
1
Positions of the ball valve
1 Open: working position
2 Closed: The air motor can still be under pressure.
3 Vent: Operating pressure in the air motor is vented
(control pressure is still present).