Filter
Top Products
VIVOTEK
162 - User's Manual
zooming wide or tele Zoom without stopping for larger view or further view with zs
speed, used for joystick control.
zs 0 ~ 6
0 ~ 15 <SD81X1>
Set the speed of zooming, “0” means stop.
vx <integer , excluding 0>
vy <integer>
The slope of movement = vy/vx, used for joystick control.
vs 0 ~ 7
0 ~ 15 <SD81X1>
Set the speed of movement, “0” means stop.
x <integer> x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y <integer> y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize <window size> The size of plug-in (ActiveX) window in web page
resolution <window size> The resolution of streaming.
stretch <boolean> 0 indicates that it uses resolution (streaming size) as the range
of the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of
the coordinate system.
auto Auto focus.
far Focus on further distance.
focus
near Focus on closer distance.
auto Let the Network Camera control iris size.
open Manually control the iris for bigger size.
iris
close Manually control the iris for smaller size.
speedlink 0 ~ 4 Issue speed link command.
gaptime 0~32768 The gaptime between two consecutive ptz commands for device.
(unit: ms)
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
8.10 ePTZ Camera Control (capability.eptz > 0)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eCamCtrl.cgi?channel=<value>&stream=<value>