Filter
Top Products
VIVOTEK
130 - User's Manual
s<0~(m-1)>_h2
64_bitrate
1000~8000000 4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h2
64_maxframe
1~25,
26~30 (only for NTSC
or 60Hz CMOS)
1/4 Set maximum frame rate in fps (for h264).
s<0~(m-1)>_h2
64_profile
<product
dependent>
0~2 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mj
peg_quant
0 ~ 5
99, 1~5
<product dependent>
4/4 Quality of JPEG video.
0 is the customized manual input setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_mj
peg_qvalue
10~200
2~97
<product dependent>
4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 0)
s<0~(m-1)>_mj
peg_qpercent
1~100 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 100)
s<0~(m-1)>_mj
peg_maxframe
1~25,
26~30 (only for NTSC
or 60Hz CMOS)
1/4 Set maximum frame rate in fps (for JPEG).
piris_mode manual,indoor,outdoor 1/4
piris_sensitivity 1~10 4/4
piris_response 1~10 4/4
piris_position 1~100 1/4
wdrc_mode 0~3 4/4 0: off
1: auto
2: always on
3:keep current value
wdrc_strength 0~2 4/4 0: low
1: medium
2: high
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for each
channel which might be for different scene of light (daytime or nighttime).
Group: videoin_c0_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable/disable this profile setting