General Information:
Approved Board Certification CSA – UL
Suction 0.256” + 0.005” / - 0.003”
Discharge 0.194” + 0.003” / - 0.003”
Process 0.256” + 0.005” / - 0.003”
Mechanical Data:
Low Starting Torque (LST)
Lubricant Charge 6.76 fl. Oz.
Lubricant type ESTER
Lubricant Viscosity @ 40° C ISO 22
Weight (with Oil Charge) 15.43 lbs.
Nitrogen Charge 2.84 to 4.27 psig.
Application:
Evaporating Temperature range 14°F to -31°F
Refrigerant R134a
Refrigerant Charge 7.5 oz.
Expanding Device Capillary Tube
Compressor Cooling Operating Range (60Hz)
LBP 32° C Ambient Temp. 98 to 140V
LBP 43° C Ambient Temp 98 to 140V
Maximum Condensing Pressures
Operating 230 psig.
Peak 293 psig.
Electrical Data:
Normal Voltage 115VAC – 60Hz
Start Winding Resistance 21.20 Ω (at 77°F) ± 8%
Run Winding Resistance 7.90 Ω (at 77°F) ± 8%
Locked Rotor Amperage (60Hz) 9.80 Amps.
Full Load Amperage (60Hz) 1.20 Amps
Check Point Data:
Test Conditions: @115V - 60Hz (Evaporator Temp.-10°F / Condensing
Temp.130°F)
Cooling Capacity ± 5% 275 Btu/h 81 Watts
Power Consumption ± 5% 75 Watts
Current Consumption ± 5% 0.98 Amps
16