Display Pad 1. Activates control panel. Pressing button for 2 seconds
toggles the display on/off. Entry tone will sound at after 2
seconds of pad depression.
2. Activates Holiday Mode. Pressing button for 15 seconds
toggles the holiday mode on/off.
3. Used in conjunction with “alarm” pad to toggle between
“F” Fahrenheit and “C” Celsius temperature reading. Press
and hold “Alarm” and “Display simultaneously for 10
seconds to change from one to the other (“F” or “C”)
4. Used in conjunction with “Alarm” button, temperature can
be displayed in either Deg F (default) or in Deg C. It can
be changed from one to the other by pressing and holding
both the “Display” and the “Alarm” buttons simultaneously
for 5 seconds. The display will show “F” or “C”.
Alarm Toggles between alarm on and off. By pressing the alarm pad
for 2 seconds.
1. Activates alarm feature.
2. Deactivates alarm feature.
3. Disables alarm in the event of a high temperature condition.
4. Used in conjunction with “Display” button temperature can
be displayed in either Deg F or in Deg C. It can be
changed from one to the other by pressing and holding both
the “Display” and the “Alarm” buttons simultaneously for 5
seconds. The display will show “F” or “C”.
Wine Cooler Leveling:
A. Lift the wine cooler off the rollers, adjust to
the desired height and level wine cooler by
using a 5/16” hex head wrench. (Refer to
Figure at the right).
1. To raise right side rear, rotate the right side
rear hex rod Clockwise.
2. To raise the left side rear, rotate the left side
rear hex rod Clockwise.
3. To raise the right side front, rotate the right
side front hex rod Clockwise.
4. To raise the left side front, rotate the left side
front rod Clockwise.
NOTE: DO NOT use an electric driving device. Over tightening can cause damage.
B. Align wine cooler with sides of cabinets by adjusting leveling legs. Rotate leveling
legs until firmly in place against floor.
C. To secure wine cooler, raise until compartment cover is firmly seated under the soffit
or anti-tip boards.
12