Filter
Top Products
LEVELING ADJUSTMENTS
DOOR STOP ADJUSTMENT
1. Using a 3/16” allen wrench, remove door stop pin located in bottom hinge.
2. The pin is factory set 110°. For 120° swing, move the pin to the utmost forward
stop hole. For 90° swing, move the pin to the utmost rear stop hole.
HINGE ADJUSTMENT
1. Using 3/16” allen wrench, remove the door stop
pin located in bottom hinge.
2. Using the height adjustment shim as a wrenching
device, rotate the height adjustment bushing
counterclockwise to raise or clockwise to lower
the location of the door.
3. When proper adjustment is reached, align shim
with door stop pin holes and replace door stop
pin. Firmly tighten pin in place.
13