Filter
Top Products
24 BAS-SVP10A-EN
Objects You Can Use in Site Graphics
Rooftop and Heat Pump Units
You can use the following objects in site graphics:
Room Temperature (AV7) W1 Heat (BI28)
Occupied and Unoccupied Heat Setpoints (AV 42 and
AV44)
W2 Heat (BI29) or Reversing Valve (BI30)
Occupied and Unoccupied Cool Setpoints (AV 43 and
AV45)
Economizer Output (AV22) (if available)
Outdoor Temperature (AV9) Aux (BI24)
Supply Temperature (AI16) (If available) DI 1 Status (BI31)
Occupancy Command (MV12) DI 2 Status (BI 32)
Effective Occupancy (MV34) Frost Alarm (BI36) (if available)
System Mode RTU (MV14) or System Mode HPU (MV13) Filter Alarm (BI38) (if available)
G Fan (BI25) Service Alarm (BI39) (if available)
Y1 Cool (BI26) Fan Lock Alarm (BI40) (if available)
Y2 Cool (BI27)
Filter Alarm (BI 38)
Off
Outdoor
Temperature (AV9)
52.4 ºF
Economizer (AV22)
10%
Supply Temperature (AI16)
65.2 ºF
G Fan (BI25)
Y1 Cool (BI26)
Y2 Cool (BI27)
W1 Heat (BI28)
W2 Heat (BI29)
Occupancy (MV12)
System Mode RTU (MV14)
Aux (BI24)
DI 1 Status (BI31)
DI 2 Status (BI 32)
Frost Alarm (BI36)
Service Alarm (BI39)
On
Off
Off
On
Off
Occupied
Heat
On
Off
Off
Off
Room Temperature (AV7)
Occupied Heat Setpoint (AV 42)
Occupied Cool Setpoint (AV 43)
UnoccupiedHeatSetpoint(AV 44)
UnoccupiedCoolSetpoint(AV 45)
68.2 ºF
69.0 ºF
72.0 ºF
62.0 ºF
82.0 ºF