Trane RT-PRC010-EN Air Conditioner User Manual


 
RT-PRC010-EN4
Features and
Benefits
Standard Features
20 to 130 ton industrial/ commercial
rooftops
Fully integrated, factory-installed/
commissioned microelectronic
controls
Unit mounted Human Interface Panel
with a 2 line x 40 character English
display and a 16 function key-pad that
includes Custom, Diagnostics, and
Service Test mode menu keys.
Trane 3-D
®
Scroll compressors
(20 to 130 Tons)
Compressor or circuit lead/lag
depending on unit
Horizontal discharge/return duct
connections (SX, SL, SS models)
CV or VAV control
Low ambient compressor lockout
control on units with economizers
FROSTAT coil frost protection on
all units
Daytime Warm-up (Occupied mode)
on VAV models and Morning Warm-up
operation on all units with heating
options
Supply air static overpressurization
protection on units with inlet guide
vanes and VFDs.
Supply airflow proofing
Exhaust airflow proofing on units with
exhaust option
Supply air tempering control
Supply air heating control on VAV
modulating hot water or steam heat
units
Emergency stop input
Liquid and Discharge Service Valves
Mappable sensors and setpoint
sources
Occupied/Unoccupied switching
Timed override activation
Forward-curved supply fans
Pitched roof over air handler section
Stainless steel flue stack on gas heat
units
14-gauge, single-piece construction
base rails
UL and CSA approval on standard
options
Two-inch spring fan isolation
(90 to 130 tons)
Meets 672 hours of salt spray testing in
accordance to ASTM B117 Standard
Two inch standard efficiency
throwaway filters on 20 to 90 ton units
and two inch high efficiency
throwaway filters on 105 to 130 ton
units.
Optional Features
Trane Communication Interface
Module: ICS interface control module
Remote Human Interface Panel
(controls up to 4 units)
Five ventilation override sequences
Heating options: natural gas, electric,
hot water or steam
Generic BAS interface
Choose from three economizer control
options: comparative enthalpy,
reference enthalpy, dry bulb control
Variable frequency drive control of
supply/exhaust fan motor
Inlet guide vanes on FC supply fans
(VAV only)
Outside air CFM compensation on VAV
units with IGV (or VFD) and economizer
Hot gas bypass to the evaporator inlet
Copper evaporator/condenser coils
Suction service valves
Replaceable core filter driers
Phenolic coated evaporator/condenser
coils
High capacity evaporator coils
(20 to 105 tons)
Special paint colors
Extended casing (SX models)
Double wall access doors
Double wall construction/perforated
double wall
Stainless steel drain pan in evaporator
section
Pitch evaporator drain pan
Filter rack only (no filters)
High efficiency throwaway filters
90-95 percent bag filters
90-95 percent cartridge filters
Final filters
Barometric relief
50 percent modulating exhaust with
forward-curved fans
Tranes air quality (Traq) sensor
Modulating Gas Heat
10 year limited warranty on Full
Modulation Gas Heat
100 percent modulating exhaust with
forward-curved fans
100 percent modulating exhaust with
FC fans and Statitrac direct space
sensing building pressurization control
High duct temperature thermostats
0 F low ambient control
0-100 percent modulating fresh air
economizer
Ultra low leak dampers for 0-100
percent modulating fresh air
economizers
Dual electrical power connection
Two-inch spring fan isolation
(20 to 75 tons)
High efficiency motors
U-frame motors
Oversized motors
Thru the door non-fused disconnect
with external handle
Electrical convenience outlet
Power supply monitoring
Correction capacitors
Horizontal or Roof discharge w/gas
heat (20-75 tons F style units only)
Field Installed Accessories
Roof curbs
Programmable sensors with night set
back CV and VAV
Sensors without night set back CV
and VAV
Remote zone sensors used for
remote sensing with remote panels.
ICS zone sensors used with Tracer®
system for zone control
Outdoor temperature sensor for units
without economizers
Remote minimum position control for
economizer
Field installed module kits available for
field upgrade of controls