Filter
Top Products
Performance Tests
Performance Verification Procedures
Read the measurement results at the : cursor readout, not the
@: readout on screen.
Fourth, read the results
here.
Second, identify the time reference
points of those waveforms.
First, display the live/reference
waveforms for channels. Note their
overlapping ground reference
indicators.
Third, turn on the cursor and align
the V bar cursors to the time
reference points.
Figure 1-11: Measurement of Channel Delay
f.
Check against limits:
CHECK that the cursor readout on screen is
250 ps.
3.
Disconnect the hookup:
Disconnect the cable from the generator output
at the input connectors of the channels.