Filter
Top Products
TABLE OF CONTENTS
1. GETTING TO KNOW MACHINE
Machine identification ------------------------------------------------6 - 7
Accessories ----------------------------------------------------------------8-9
2. GETTING STARTED SEWING
Leveling Machine ------------------------------------------------ 10-11
Setting up machine --------------------------------------------- 10 - 11
Spool pins ------------------------------------------------------------ 12- 13
Winding bobbin ---------------------------------------------------- 14 - 15
Inserting the bobbin ------------------------------------------------ 16-17
Setting the top thread ---------------------------------------------- 18-19
Automatic needle threader -------------------------------------- 20 - 21
Picking up bobbin thread ---------------------------------------- 22 - 23
Control panel function -------------------------------------------- 24 - 27
Quick reference table of stitch length and width ---------- 28 - 29
Straight stitching --------------------------------------------------- 30 - 35
Keeping seams straight, Turning a square corner,
Reverse stitch, Inserting zippers and piping
Hand-look quilt stitch -------------------------------------------- 34 - 35
Zigzag stitching ----------------------------------------------------- 36 - 37
Adjusting stitch width and length, Satin stitch
Placement of patterns
Blind stitch --------------------------------------------------------- 38 - 39
Multi-stitch zigzag -------------------------------------------------- 40 - 41
Stretch stitches ----------------------------------------------------- 42 - 47
Straight stretch stitch, Ric-rac stitch, Honeycomb stitch,
Feather stitch, Pin stitch, Ladder stitch, Blanket stitch,
Slant pin stitch, Slant Overedge Stitch
Decorative Stitching ----------------------------------------------- 48 - 49
Continuous patterns ----------------------------------------------- 50 - 51
Sewing on a button ------------------------------------------------ 50 - 51
Buttonhole making ------------------------------------------------- 52 - 57
Using buttonhole foot, Procedure, Corded buttonholes
3. PREPARATION FOR EMBROIDERY SEWING
Before attaching embroidery unit ---------------------------- 58 - 61
Attaching embroidery foot, Inserting the bobbin,
Setting top thread, Picking up bobbin thread,
Extension table, Feed dog control
Attaching embroidery unit ------------------------------------- 62 - 63
Removing embroidery unit ------------------------------------- 62 - 63
Securing material in embroidery hoop ---------------------- 64 - 65
Using the material and stabilizer ----------------------------- 66 - 69
Preparing the machine before installing the hoop ------- 70 - 71
Attaching and removing embroidery hoop ----------------- 70 - 71
Installation of software ------------------------------------------- 72 - 75
Operation switches when embroidery unit is attached - 76 - 77
Operation switches, Thread tension control
Troubleshooting --------------------------------------------------- 78 - 89
4. OTHER THINGS YOU SHOULD KNOW
Presser foot lifter --------------------------------------------------- 90-91
Feed dog control ---------------------------------------------------- 90-91
Converting to free-arm sewing -------------------------------- 90 - 91
Adjusting top thread tension ----------------------------------- 92 - 93
Changing presser foot ------------------------------------------- 92 - 93
Operation switches ----------------------------------------------- 94 - 95
Needle, thread and fabric chart ------------------------------- 96 - 97
Performance checklist ------------------------------------------ 98 - 99
Cleaning hook area and feed dogs ------------------------100- 101
Oiling inside the face cover ----------------------------------102 - 103
Special accessories -------------------------------------------104 - 105
Helpful messages ----------------------------------------------106 - 109
For European version
Sewing machine
Dimensions: 428 mm × 307 mm × 294 mm
Mass of the equipment: 10 kg
Embroidery unit
Dimensions: 433 5 mm × 269 5 mm × 133 mm
Rated Voltage: 230V ~
Rated Frequency: 50Hz
Rated input: 60W
Rated ambient temperature: 15
-
35
°
C