Filter
Top Products
B
cable is not connected.
Connect your PC to the sewing machine with USB cable.
eign particle is inserted into cord socket for foot control plug.
→ Remove foreign particle.
broidery unit is installed with small hoop attached.
→ Remove embroidery unit and small hoop and then re-
attach embroidery unit or remove small hoop and turn off
and on power switch.
e
dle is lowered when starting embroidery sewing. → Raise needle by rotating hand wheel toward you.
o
t control plug is pushed in and pulled out while sewing patterns.
Don’t touch the plug while sewing.
e
dle thread breakage or incorrectly threaded condition is detected.
Check threading.