Filter
Top Products
TEMPORARY STORAGE
(30 Days Or Less)
Here’s a quick checklist of things to do when storing
your Chipper Vacuum temporarily, or between uses:
l Keep the unit in an area away from where children
may come into contact with it.
l When this equipment is stopped for service, inspec-
tion, or storage, or to change an accessory, opera-
tors shall make sure the spark plug wire is discon-
nected from the spark plug.
l Remember, the Chipper Vacuum fuel tank probably
will still contain some gasoline, so never store the
Chipper Vacuum indoors or in any other area where
fuel vapor could travel to any ignition source. Fuel
vapor is also toxic if inhaled, so never store the
Chipper Vacuum in any structure used for human or
animal habitation.
l Never put the unit away while the engine is still hot
from running. Let the engine cool down first to
prevent the chance of fire.
l Never try to lift or position the unit in the storage
area by holding the fuel tank. Always let the engine
and muffler cool completely before allowing yourself
to contact these parts.
l If the unit can’t be stored on a reasonably level
surface, use a block of wood to chock the wheels.
Never store the Chipper Vacuum where it will not be
in a stable position.
l Never tip the unit more than 45” from vertical, and
never lay the unit on its side, as this could cause fuel
leakage, and/or undesirable oil transfer into the
cylinder head and spark plug area. Excessive oil in
the cylinder head will prevent the engine from starting
properly.
LONG TERM/SEASONAL STORAGE
(Longer Than 30 Days)
Your Chipper Vacuum can be safely stored during
off-
seasons by following these simple storage instructions:
l For extended storage periods, run the unit dry of
gas.
Storage
l Cover the Chipper Vacuum unit to protect it from
debris and foreign objects.
l Avoid damp storage locations to prevent rusting of
metal parts.
l When this equipment is stopped for service, inspec-
tion, or storage, or to change an accessory, opera-
tors shall make sure the spark plug wire is discon-
nected from the spark plug.
l Drain fuel system completely following engine
manufacturer’s instructions or add fuel stabilizer to
prevent fuel from gumming up during extended
storage period.
l Clean external surfaces, engine and cooling fan.
l Remove spark plug, and squirt 1 ounce of SAE 30 oil
into spark plug hole.
l Plug hole and pull starter cord slowly or crank engine
briefly to distribute oil evenly in cylinder head area.
l Reinstall spark plug.
l Transport unit to a suitable storage location. If you
have chosen to use a fuel stabilizer and have not
drained the fuel system, follow all safety instructions
and storage precautions in this manual to prevent
the possibility of fire from the ignition of gasoline
fumes. Remember, gasoline fumes can travel to
distant sources of ignition and ignite, causing risk of
explosion and fire.
l For additional convenience and a reduction in the
amount of floor space required for storage, the
handle assembly may be moved to a vertical position
by removing the locking knobs and carriage bolts,
loosening the bag support cap screws, and rotating
the handle up toward the unit. Be sure to keep the
locking knobs and carriage bolts with the unit for
reinstallation when the unit is put back into service.
Electric Start Units Only
l Be sure the battery is fiiled to the proper level with
water and is fully,charged. Battery life will be
increased if the battery is removed and put in a cool,
dry place and fully charged about once a month. If
the battery is lefi in your unit, disconnect the
nega-
tlVe
Cable to prevent battery drain during storage.
22