Filter
Top Products
iEM3100 / iEM3200 / iEM3300 series user manual Communications via LonWorks
DOCA0005EN-04 73
Meter Status This tab provides information on the settings and status of the digital input and alarms
as well as existing power system settings.
Meter Config This tab provides access to the meter configuration properties, allowing you to
configure power system, digital input, alarm, Multi Tariff and time settings.
NOTE: If you see a message that the configuration was unsuccessful, make sure: 1) the meter is
properly commissioned in LonMaker and the plug-in is communicating with the meter, and 2)
that Com. Protection is disabled on the meter.
Diagnostics This tab provides LonMaker diagnostics information related to the meter.
Tab name Description