Filter
Top Products
iEM3100 / iEM3200 / iEM3300 series user manual Front panel display and meter setup
DOCA0005EN-04 49
Communication (iEM3235)
Primary Addr. 0 - 255
Set the address for this device. The address must be unique for each device in a
communications loop.
Baud Rate
2400
4800
9600
300
600
1200
Select the speed for data transmission. The baud rate must be the same for all devices
in a communications loop.
Communication (iEM3265)
MAC Addr. 1 - 127
Set the address for this device. The address must be unique for each device in a
communications loop.
Baud Rate
9600
19200
38400
57600
76800
Select the speed for data transmission. The baud rate must be the same for all devices
in a communications loop.
Device ID 0 - 4194303
Set the Device ID for this device. Make sure the Device ID is unique in your BACnet
network.
Com.Protection Com.Protection
Enable
Disable
Protects selected settings and resets from configuration via communications.
Contrast Contrast 1-9 Increase or decrease the value to increase or decrease the display contrast.
Password Password 0-9999 Sets the password for accessing the meter configuration screens and resets.
Reset Config Reset Config — Settings are reset to their defaults, except for Password. Meter restarts.
Section Parameter Options Description