50 NTE/CCD Detector ManualVersion 2.A
7. Warranties extend only to defects in materials or workmanship as limited above
and do not extend to any product or part which has:
• been lost or discarded by you;
• been damaged as a result of misuse, improper installation, faulty or
inadequate maintenance or failure to follow instructions furnished by us;
• had serial numbers removed, altered, defaced, or rendered illegible;
• been subjected to improper or unauthorized repair; or
• been damaged due to fire, flood, radiation, or other “acts of God” or other
contingencies beyond the control of Roper Scientific.
8. After the warranty period has expired, you may contact the Roper Scientific
factory or a Roper Scientific-authorized representative for repair information
and/or extended warranty plans.
9. Physically damaged units or units that have been modified are not acceptable for
repair in or out of warranty and will be returned as received.
10. All warranties implied by state law or non-U.S. laws, including the implied
warranties of merchantability and fitness for a particular purpose, are expressly
limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law or non-U.S. laws, as hereby
limited, the forgoing warranty is exclusive and in lieu of all other warranties,
guarantees, agreements, and similar obligations of manufacturer or seller with
respect to the repair or replacement of any parts. In no event shall Roper
Scientific’s liability exceed the cost of the repair or replacement of the defective
product or part.
11. This limited warranty gives you specific legal rights and you may also have other
rights that may vary from state to state and from country to country. Some states
and countries do not allow limitations on how long an implied warranty lasts,
when an action may be brought, or the exclusion or limitation of incidental or
consequential damages, so the above provisions may not apply to you.
12. When contacting us for technical support or service assistance, please refer to the
Roper Scientific factory of purchase, contact your authorized Roper Scientific
representative or reseller, or visit our technical support page at
www.
roperscientific.com.
Contact Information
Roper Scientific's manufacturing facility for this product is located at the following
address:
Roper Scientific
3660 Quakerbridge Road
Trenton, NJ 08619 (USA)
Tel: 609-587-9797
Fax: 609-587-1970
Technical Support E-mail: techsupport@roperscientific.com
For technical support and service outside the United States, see our web page at
www.roperscientific.com
. An up-to-date list of addresses, telephone numbers, and e-mail
addresses of Roper Scientific's overseas offices and representatives is maintained on the
web page.