Regency L676S-NG1 Indoor Fireplace User Manual


 
Regency® L676S Direct Vent Gas Fireplace 39
MAINTENANCE
MAINTENANCE
1) Disconnect the 2 DC Spark generator wires
from the DC spark box located on the right
side of the rebox.
DC SPARK BOX REPLACEMENT
4) Replace the DC spark box.
5) Reverse steps to re-install.
2) Disconnect the spark electrode from the DC
spark box.
DC Spark Box Wires
DC Spark Box Location
Spark Electrode
DC SPARK
BOX BATTERY
REPLACEMENT
1) Remove the faceplate, locate the DC spark
box on the right side of the fi re box.
2) Remove the battery cover from the DC
Spark Box.
3) Remove AA battery and replace with a new
one.
4) Re-install battery cover on DC Spark Box.
5) Reinstall the faceplate (see page 35).
3) Remove the 1 screw that secures the DC
spark box in place.