Filter
Top Products
UltraGlow
®
G36D Zero Clearance Direct Vent Gas Fireplace
®
G36D Zero Clearance Direct Vent Gas Fireplace
®
28
INSTALLATION
Log indentation
Photo shows rear grate tab.
Log
02-51 was removed to show the
positioning of Log 02-52.
Rear
Grate Tab
Rear Bracket
7)
Place the bottom left front edge of Log
02-55
against the rear bracket
on the burner tray and rest the log on the cutout on Log 02-53.
Cutouts
8)
Place Log
02-52
between Logs 02-51 and 02-75 and on the indentation
on Log 02-54. The bottom right end sits behind the rear grate tab.
Front Brackets
Notch
9)
Sit Log
02-50
on the front left side of the burner. Push the back of
the log against the 2 front brackets with the notch on the bottom of
the log fi tting into the fi rst grate tab.
5th Grate Tab
6)
Position Log
02-54
across the cutouts in Logs 02-51 and 02-53. The
notch in the bottom right end fi tting against the 5th grate tab.
02-54
02-51
02-75
02-55
02-53
02-51
02-51
02-54
02-52
02-75
02-54
02-52
02-53
02-50
02-53
02-55
02-50
02-54
02-53