Filter
Top Products
UltraGlow
®
G36D Zero Clearance Direct Vent Gas Fireplace
11
VENTING
UltraGlow
®
UltraGlow
®
UltraGlow
Direct Vent System (Flex)
®
Direct Vent System (Flex)
®
Horizontal Terminations Only
These venting systems, in combination with the G36D Direct Vent Gas Fireplace, have been tested and listed as a direct vent heater system by
Warnock Hersey. The location of the termination cap must conform to the requirements in the Vent Terminal Locations diagram in the "Exterior Vent
Termination Locations" section.
UltraGlow
®
UltraGlow
®
UltraGlow
Direct Vent Flex Termination Kit (Part # 946-515) includes all the parts
®
Direct Vent Flex Termination Kit (Part # 946-515) includes all the parts
®
needed to install the G36D with a maximum total run of 4 feet.
INSTALLATION
Notes:
1) Liner sections should be continuous without any joints or seams.
2) Only Flex pipe purchased from Regency
®
may be used for Flex installations.
®
may be used for Flex installations.
®
1)
6-7/8" dia. fl exible liner (4 ft. length)
2)
4" dia. fl exible liner (4 ft. length)
3)
spring spacers (4)
4)
thimble (2)
5)
AstroCap
termination cap (1)
6)
screws (12)
7)
tube of Mill Pac (1)
8)
plated screws (8)
9)
screws #8 x 1-1/2" Drill Point, Stainless Steel (4)