Filter
Top Products
27
Using SECURITY LIGHT
Use the
SECURITY LIGHT
button on the
handheld remote control or the con-
sole to turn on/off a light module set to
the same House and Unit Code as you
selected when you set up the system.
Using BRIGHT/DIM
Use the
BRIGHT/DIM
button on the
handheld remote control to brighten or
dim lights connected to Plug ´n Power
lamp modules.
Turn on the module by pressing the re-
mote control
ON
button that corre-
sponds to the module’s Unit Code.
Then press and hold
BRIGHT
or
DIM
on
the remote control until the light reach-
es the desired brightness.
Note:
You cannot brighten or dim
lamps connected to appliance mod-
ules.
RESETTING THE
CONSOLE
To remove all sensor transmitters from
memory, set the console’s
INSTALL/
RUN 1/RUN 2
switch to
INSTALL
. Then
press
PANIC, ARM HOME
, and
ARM
AWAY
at the same time.
Note:
This does not clear the settings
that ORCA Monitoring Services pro-
grammed into your system during ini-
tialization.
ARM
AWAY
SECURITY
LIGHT
ON OFF
AUTOMATIC
MESSAGE
DIALLER
plug'n power
C O M P A T I B L E
DISARM
ON OFF
A
I
EM
O
C
GK
•
•
••
•
•
••
INSTANTDELAY
BRIGHT DIM
ENTRY
49-2570.fm Page 27 Wednesday, August 18, 1999 3:59 PM