Filter
Top Products
13
Notes:
• If you do not have an unused jack,
use the supplied duplex adapter.
For a baseboard jack, plug the
adapter into the jack; for a wall
jack, plug the adapter into the
console.
• If you do not have a modular
phone jack, you can either update
the wiring yourself or have the
phone company do it for you.
Radio Shack stores sell the jacks
and adapters you need. The
phone company charges to install
the jacks. The USOC number of
the jack to be installed is RJ11C
for a baseboard jack or RJ11W for
a wall jack.
INSTALLING THE
KEYCHAIN REMOTE
CONTROL
1. Remove the keychain remote con-
trol’s back cover. Install two AAA
alkaline batteries (Cat. No. No.
23-555) in the battery compart-
ment, according to the polarity
symbols (+ and –) marked inside.
Then replace the cover.
2. Set the console’s
INSTALL/RUN 1/
RUN 2
switch to
INSTALL
.
3. Stand near the console and press
ARM
on the remote control. The
console chimes and logs in the
remote control.
4. Leave the console’s switch set to
INSTALL
to install other accesso-
ries.
TELEPHONE
CORD
To
Telephone
BATTERY
ARM
DISARM
ON
OFF
PANIC
LIGHTS
49-2570.fm Page 13 Wednesday, August 18, 1999 3:59 PM