Filter
Top Products
14
Notes:
• You can add any combination of
up to eight Plug ´n Power
remote controls.
• When you press a button, the
BATTERY indicator on the
remote control lights to show
the battery is good.
INSTALLING THE
HANDHELD REMOTE
CONTROL
1. Press the tab on the battery com-
partment cover and lift off the
cover.
2. Install four AAA alkaline batteries
(Cat. No. 23-555) in the handheld
remote control’s battery compart-
ment, according to the polarity
symbols (+ and –) marked inside
the compartment.
3. Be sure the console’s
INSTALL/
RUN 1/RUN 2
switch is set to
INSTALL
.
4. Set the house code on the remote
control to the same letter as you
selected when you set up service.
5. Press
ARM HOME
or
ARM AWAY
on the handheld remote control.
The console sounds a tone.
Note: If you do not hear a tone,
press the button beneath the
remote control’s label with a pen-
cil. Then repeat this step.
A
I
EM
O
C
GK
•
•
••
•
•
••
INSTANTDELAY
BRIGHT DIM
ENTRY
PANIC
ARM
HOME
ARM
AWAY
SECURITY
LIGHT
DISARM
ON OFF
PANIC
ARM
HOME
ARM
AWAY
SECURITY
LIGHT
ON O
F
WIRELESS
SECURITY
SYSTEM
•
AUTOMATIC
MESSAGE
DIALLER
plug'n power
C O M P A T I B L E
DISAR
M
ON O
F
Press
49-2570.fm Page 14 Wednesday, August 18, 1999 3:59 PM